|
|
| OEE and Downtime Analysis |
|
|
 |
|
Solutions > OEE and Downtime Analysis
|
|
|
|
|
|
Out-of-the-box and fully web-enabled, ICONICS OEE and Downtime Analysis is a cost effective solution
that provides access to downtime reporting, fully interactive plant visualisation as well as complete
system configuration.
|
|
 |
|
|
Harnessing the power of ICONICS GENESIS32 and BizViz software, the ICONICS OEE and Downtime Analysis
solution has the ability to hook directly into your existing SCADA and Manufacturing Intelligence systems.
Visualise your live plant data, along with OEE and downtime reports in a fully integrated, web enabled
interface. With minimal engineering to get set up and running, the ICONICS OEE and Downtime Analysis
solution is cost effective with an almost immediate ROI.
|
|
 Integration with Existing Solutions
|
The ICONICS OEE and Downtime Analysis solution allows for integration with your existing SCADA and
Manufacturing Intelligence data. Pull both plant and corporate data into the single web-based interface
from any OPC-enabled SCADA system. With existing ICONICS GENESIS32 systems, you can seamlessly integrate
your plant control into the interface and expose it to thin-client machines using WebHMI technology.
|
|
|
|
Key Aspects
|
Follows the standard for defining levels of information storage, with Enterprise, Plant, Area, Line
and Cell levels supported by default. Up to 9 levels can be configured, providing fine grain distinction
into the performance of your enterprise
Unified Web-based interface that provides access to downtime reporting, full interactive plant visualisation
as well as complete system configuration in a single environment.
Visual reporting from your SCADA visualisation with ICONICS GENESIS32 technology. Visualise plant stoppages
and then run reports directly from the source of the problem via right-click functionality.
Fully customisable, flexible reporting engine, harnessing the power of ICONICS BizViz technology. Microsoft
Excel-based template functionality allows complete customisation of OEE and downtime reports. Use the full
potential of Microsoft Excel with dynamic content, extensive formulae and Visual Basic technology.
Leverage your existing SCADA and Manufacturing Intelligence systems, saving on costs and retraining.
Leverage your existing PLC networks. Easily expose non-OPC data without the need for additional expensive
hardware.
|
|
|
 |
 |
 |
 |
|
Building upon the base of rich functionality within GENESIS32 and BizViz software, the ICONICS
OEE and Downtime Analysis solution helps you track and evaluate your business productivity.
|
|
|
|
)
)
)
)